top of page

Case Study: A 5.2 m Studio Bar, from Concept Render to Production Files

21 hours ago
1 min read

Client: our own studio, St. Paul's Bay · Sector: Interiors and furniture · Tools: SketchMonkey and 3DJ with Claude · Output: 25 parts, bracket positions, cut and print files

SketchMonkey concept render of the oak standing bar with faceted corners and white edge

The problem

Our studio needed a wall-mounted standing bar over five metres long: a solid wood top, a faceted nose that follows a tapered mirror, pull-out trays, a sink section and a white edge. Angles like these are slow to sketch and easy to get wrong on site.

What we did

  • SketchMonkey turned the brief into photoreal concept options, so we judged proportions and materials before cutting anything.

  • 3DJ rebuilt the chosen design as a parametric CAD model and a live configurator: height, corner style, mirror taper, nose depth, trays and edge colour are all sliders.

  • The model produced the build data directly and exports STL, STEP or GLB in one click.

The result

  • 5.21 m bar made of 25 parts

  • Brackets positioned at 160, 265, 370 and 474 cm

  • Three trays on 300 to 500 mm slides

  • A 5.34 m edge split into 29 printable segments, about 1.6 kg of PETG

Read the full story: From Dream to Production Part.

Want this for your space or product?

Interior pieces, fixtures and product parts work the same way: concept, parametric model, then cut lists and print files from one source of truth.

Comments


bottom of page